China Sealcon Company

Sealing Sense

Thermal growth rate differences of head flanges, tube-sheets, bolts and gaskets create an upset of the gasket-flange interface and a loss of seating stress on the gasket that can cause flanges to leak. As the equipment heats, the exchanger flanges’ faces grow axially and radially. Axial growth causes compressive stresses on the gasket beyond what was provided by the bolt pre-load. Because the flanges and gasket are made of different material, the rates of thermal expansion are different.

Radial growth causes the flange surfaces to wipe across the gasket, upsetting the gasket-flange interface and potentially causing leak paths. Some gaskets, such as corrugated metal with flexible graphite laminates, handle this service better than others. A test developed by the now-defunct Tightness Testing and Research Laboratory of the Polytechnique Montréal included an evaluation to address this called the Radial Shear Test (RAST). Another technology (flange springs) could have been used to give more travel during this time that could have kept a larger seating stress on the gasket.

The 2010 explosion at Anacortes was not directly caused by poor gasket application. The NHT heat exchanger vessel ruptured and caused the fire because of the vessel material's high-temperature hydrogen attack, which is metal deterioration from high-temperature hydrogen contact. Because of safety complacency that accepted heat exchanger leaks during startup, additional personnel was required to manage those leaks, which led to the tragic loss of life. Technology and know-how are available to assure safe sealing that can make sure everyone safely ends the workday.

References

"OSHA Update," presentation given to the Monroe Professional Engineers Society on Sept. 27, 2016, by Gordon DeLeys, OSHA Compliance Assistance Specialist.

Report can be downloaded at the U.S. Chemical Safety Board website: http://www.csb.gov/tesoro-refinery-fatal-explosion-and-fire/

See other Sealing Sense articles here.
Related News
  • Sealing Sense

    Sealing Sense

    November 29, 2017Thermal growth rate differences of head flanges, tube-sheets, bolts and gaskets create an upset of the gasket-flange interface and a loss of seating stress on the gasket that can cause flanges to leak...view
  • Classification Of Rubber Seal Ring

    Classification Of Rubber Seal Ring

    May 4, 2018There are all kinds of rubber seal rings in rubber seal factory. According to the ssutting shape, it can be divided as follows:O seal ring series (DSH seal series)It has many kinds of products, such a...view
  • Leakage Analysis And Maintenance Of Mechanical Seal

    Leakage Analysis And Maintenance Of Mechanical Seal

    May 4, 2018Leakage analysis and maintenance of mechanical seal1. Repair of mechanical sealMechanical seal flygt pump do not need special tools and materials for maintenance. Generally speaking, mechanical seals ...view
  • Common Problems In Mechanical Seal Pump

    Common Problems In Mechanical Seal Pump

    May 4, 2018The following are several common failure about the seal of mechanical seal flygt pump:(1). Leakage during installation of static test. After the mechanical seal is installed and debugged, the static p...view
  • The Mechanical Seal Of The Pump

    The Mechanical Seal Of The Pump

    May 4, 2018The mechanical seal of the pump is the material or part that prevents the leakage of fluid or solid particles from the adjacent surface and prevents the external impurities, such as dust and water, in...view
  • Sealing Technology

    Sealing Technology

    May 4, 2018Sealing technology mainly refers to the use of a certain combination of sealing materials, sealing elements and the corresponding seal structure form, to prevent or cut off the mass transfer process b...view